Kitchen Sink Installation in Hendra

200+ five-star Google reviews

Getting a new bowl into the bench is a licensed job, and kitchen sink installation in Hendra is what this page covers. Hendra Same Day Plumbing handles new bowls, like-for-like swaps and leaks at the bench, and the deeper drain faults belong on our blocked drains page. Every job is done by a licensed plumber, working across Hendra and the surrounding streets.

If we're late, $100 comes off your bill

Hendra Same Day Plumbing team with the ute
Same Day Service
  • Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
  • Fixed Quote FirstFlat-rate pricing, agreed before any work starts
  • Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
  • $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
Hendra Same Day Plumbing team and ute

Half the homes here have four or more bedrooms, at the last census, and those big family kitchens get hard daily use. When a bowl rusts through or a cupboard floor goes damp, the fix usually starts with this page. It sits under our wider kitchen and laundry plumbing service.

What a Kitchen Sink Replacement Includes

The work connects five things: the hot and cold supplies with their isolation valves, the tap, the waste fitting, the trap and the waste pipe to the drain. A leak test across every joint closes the job off.

  1. Isolation valves

    one on each supply line, so the sink can be shut off without killing water to the rest of the house.

  2. The waste fitting

    the part that seals the drain hole in the bowl.

  3. The trap

    holds a water seal that blocks sewer gas rising back through the waste.

  4. Supply connections

    hot and cold lines feeding the tap.

  5. Leak test

    run across all of it before we pack up.

If a dishwasher drains through the sink waste, the replacement waste needs a spigot for its hose. Our dishwasher installation page covers that side of the kitchen in full.

Where a Kitchen Sink Leaks

Watch five spots: the trap and waste joints, the seal under the waste fitting, the tap base, the supply connections and the seam at the benchtop. Each one shows up differently.

  1. Trap or waste joint

    a drip that finds the cupboard floor.

  2. Waste fitting seal

    water tracking around the drain hole.

  3. Tap base

    seepage where the spout or mixer meets the bench or sink.

  4. Supply connection

    weeping at a nut or thread behind everything.

  5. Benchtop seam

    a failing bead of silicone letting water under the rim.

A soft cupboard base, a musty odour or a water stain means a slow leak even with no drip in sight. The braided hoses feeding the mixer are another quiet failure point, and our flexi hose replacement page deals with them directly.

Who May Fit a Kitchen Sink in Queensland

Queensland reserves this work for licence holders: no one but a licensed plumber connects a sink here. A new or relocated sink in an existing building is notifiable work, reported to the QBCC on a Form 4 within 10 business days of completion. A like-for-like replacement in the same position is minor work: a licensee still does it, with no permit and no Form 4.

The owner keeps a copy of any Form 4 for their records. The QBCC's online registers let you confirm a plumber's licence and check whether a Form 4 has been lodged for your address. Renters should note that attaching a fixture needs the owner or manager's written approval first.

Drop-In and Undermount Sinks Compared

A drop-in sink sits on its rim above the cut-out, while an undermount is fixed beneath the benchtop and needs a cut-out that is exact and sealed. The benchtop usually decides which one suits.

  1. Drop-in

    the rim covers a rough cut, which suits laminate benchtops and makes the fit simpler.

  2. Undermount

    clips or support brackets carry the bowl's weight from below, so the visible cut-out edge needs to be precise and sealed with silicone.

Tapware, wastes and connectors fitted in Australia carry WaterMark certification and a listing on the product database. A new mixer to go with the bowl is covered on our tap replacement page.

Like for Like or a New Position

The price of a sink job turns on where the bowl goes and what has to move with it. New water or waste points, tight access under the bench, the benchtop material and the tap and fittings you choose all change the figure. No dollar figure travels between kitchens.

Once we have seen the job, the figure arrives as a fixed quote before any work starts. Flat-rate pricing, no hidden fees, and your go-ahead comes first.

One local factor can add time on the older lots. Houses around Bowley Street and its neighbours went in with galvanised pipe, and where that steel survives under floors it rusts at the joints. Reaching a sound connection point can mean extra access work before the new bowl goes in.

How We Install Your Sink

  1. 1

    Describe the problem

    Phone (07) 3523 7172 or fill in the form with what you're seeing in Hendra. The more we know, the better we can prepare.

  2. 2

    On the visit

    We isolate the supplies, disconnect the old bowl, tap and trap, then connect the new sink's supply lines, waste fitting and trap, and finish with a full leak test at every joint.

  3. 3

    Agree on the price

    A fixed quote comes before any work starts: flat-rate pricing, no hidden fees, and your go-ahead first.

  4. 4

    Pay on completion

    Card or EFTPOS on site when everything's working, or ask us about Fix now, pay later.

Plumbing job in Hendra?

$0 call-out fees, available 24/7, and same-day where we can.

Kitchen Sink Questions From Hendra

Call (07) 3523 7172

How is a kitchen sink installed?

A licensed plumber shuts the water off, removes the old bowl and tap, then connects the tap, waste, trap and both supply lines. Every joint gets a leak test before the cupboard door closes again.

Do I need a plumber to install a kitchen sink?

Yes, the QBCC lists fixing or replacing sinks as regulated work for a licensed plumber or drainer. A sink is not on its short unregulated list.

Can I install a kitchen sink myself in Hendra?

No, the water and waste connections are licensed work from the first fitting. The only kitchen plumbing a householder may legally touch is a tap jumper valve or washer.

How do I check my plumber is licensed?

The QBCC's online registers show whether a plumber holds a current licence, and whether a Form 4 has been lodged for your property. You can check both before you book.

Can a kitchen sink in Hendra be moved to a new spot?

Yes, a relocated sink is notifiable work in Queensland. A licensed plumber runs the fresh supply and waste lines and lodges a Form 4 with the QBCC within 10 business days of finishing.

Call Us About Your New SinkWe'll call you back.

Book on (07) 3523 7172 for plumbing anywhere in Hendra. We're available 24/7, there's no extra charge for nights, weekends or public holidays, and every job comes with $0 call-out fees.

To claim your $0 call-out fee, call (07) 3523 7172 today.

Call (07) 3523 7172

Your details are kept private and used only to respond to your enquiry.

Call (07) 3523 7172Get a quote